TMRM

April 14, 2017 8:13 pm Published by

Facts TMRM range:

  • Chuck with concentric clamping by means of floating jaws and with pull back movement (max. 0.5 mm) to press the workpiece against the workstop
  • Clamping distribution for workpieces which can be deformed
  • Internal or external clamping
  • Very good accuracy and repeatability
  • Supplied with quick change top jaws TMCR that allows change from one part to another without remachining of the top jaws, without setting time in less than one minute.

Description

Model TMRM 160 TMRM 200 TMRM 230 TMRM 315 TMRM 350
Clamping Method External External External Internal / External Internal / External
Number of Jaws 3 3 3 3 6
External 160 200 230 315 350
E1 95.0 112.5 112.5 192.0 179.4
E2 113.0 127.0 128.5 219.0 201.0
R 46.0 57.5 72.5 80.0 111.0
Fixed 5″ 5″ to 6″ 6″ 8″ to 11″ φ310 H7
Capacity φ110 φ140 φ170 φ210 φ270
X-direction Jaw Stroke O1 1.7 1.4 1.4 3.0 2.5
X-direction Jaw Stroke O2 1.9 1.6 1.6 4.0 3.0
X Direction 25 30 30 40 35
P 3.0 3.0 3.0 53.0 12.5
Drawbar Stroke C1 4 4 4 8 8
Drawbar Stroke C2 4.5 4.5 10.0 11.0 11.0
M Screw 12 16 16 24 24
Max. F (daN) 1,500 2,200 2,200 4,500 4,500
Max. X-direction FR (daN) 2,200 3,800 3,800 7,800 9,400
Max. RPM (min-¹) 5,500 4,000 4,000 4,500 3,500
Mass (kg) 13* 22* 30* 90* 110*

1 daN = 10 N * Without jaws and work rest

Categorised in:

This post was written by altifortobler